A Professional Fence Company should have a variety options for Commercial Gate applications. The gate systems are designed to restrict unwanted entry and ensure the protection of assets and employees. Gate systems are designed to work efficiently with repeated mechanical use in any setting. Hurricane Fence Company offers the latest in Commercial Gate System trends and technology in a plethora of scales and styles. These maneuverable fence barriers can be engineered to meet the needs of everything from small Residential Secured Access to the most complex structural demands.

The following are a few examples of routinely offered Commercial Gate Systems.  

Swing Arm Gates

swing arm gate

Swing Arms are motorized barriers that raise a steel or aluminum arm from a horizontal position to a vertical position. They give you the ability to control pedestrian and/or vehicle traffic on roadways up to 38'. These gates can have an assortment of automatic controls, such as card readers, vehicle detectors/counters, reversing logic, which causes the arm to re-open should it strike an object, and anti tailgating devices, which keep multiple vehicles from pulling through on a single cycle. A switch in a security office can also be set up to control these gates.

Many Fence Contractors also offer High Speed Swing Arm Gates that will open in less than two seconds, using either 8 or 12' arms. Heavy duty gates, with arms up to 24', are also available if gate specifications require them.

Slide Gates   

sliding gate 

Sliding Gates are often the best solution for commercial premises with busy access points. You must have room set aside for the gate in the open position. Installers can customize slide gates to accommodate a wide range of commercial applications. Many different styles of slide gates are available of which the most common is a two-rail slide gate.

There are three rail slide gates that will allow the use of almost any material you wish to face the gate. For this the commonly used materials are plastic, wood, or metal. A well set up fence supplier can also custom fabricate a slide gate to match a wide range of already existing gate styles. 

Cantilever Gates

cantaliever gate cantaliever gate

Automation of a cantilever slide gate involves the addition of a slide gate operator that can be pad or post mounted. This provides a means to open or close the gate and the addition of safety devices such as safety loops, gate edges or photo eyes. Gate operators can be added to existing gates as well as new ones and integrated into any existing access control system.

The gate itself does not touch the ground and is supported by rollers, which are attached to two large side posts.

The gate will have a tail that is used to support itself when it is in the open position. One thing to keep in mind when considering the installation of a cantilever gate is that you must have adequate overhead clearance to ensure that the gate can open fully.

Cantilever Gate Systems can be constructed with nearly any fencing material, but the distance of the opening will play an important role in determining which type of materials you can use when constructing your Commercial Gate. Lighter fabrication materials should be considered when spanning wide opening, which will make the overall weight of the gate lighter.   

See Commercial Gate Fabrication in action on Hurricane Fence Company's Youtube channel.Commercial Gates, Commercial Gates Richmond, Gate Fabrication Richmond, gates richmond, gates norfolk, gates williamsburg, gates va beach, gate making richmond